基于多孔环形喷嘴的可燃爆粉尘分散特征的密度效应研究*

为了研究不同密度的可燃爆粉尘在内置多孔环形喷嘴的20 L爆炸特性测试装置中的分散特征，基于负载粒子流方法、耦合DPM动量平衡方程和时间平均 Navier Stokes控制方程组，实现3种不同密度的煤粉、铝粉和锆粉在20 L爆炸测试装置中粉尘分散全过程的数值模拟。研究结果表明:多孔环形喷嘴的分散较为均匀，但是约束管道末端存在局部粉尘残留区，致使爆炸仓内真实粉尘浓度远低于形式浓度；爆炸仓中心位置的最大湍动能随着粉尘密度的增加而减小，只有显著地变化粉尘密度才能展示区分度较高的浓度峰值和抵达浓度峰值的时间。     

Estimate on spillover effect of environmental pollution between peripheral areas

ABSTRACT

Interaction of environmental pollution between peripheral areas has become a central topic in the field of resources and environment but little is known about the actual impact on peripheral areas in the current literature. This paper sets out a simultaneous equation model to investigate the spillover effect of environmental pollution between China’s peripheral areas utilizing the panel data of 218 cities in China. Making use of indicators for measuring the impact on environmental pollution, it identifies that environmental pollution between cities of China has a significant two-way spillover effect. After standardization of variables, it is found that the spillover effect of peripheral areas on urban environmental pollution cannot be neglected. Nearly, a third of the environmental pollution level in a city is induced by the environmental pollution in peripheral areas. If the indicator of environmental pollution in peripheral areas is missing, wrong conclusions will be drawn. Therefore, government should shift the emphasis of environmental regulation from local to global, and improve the overall environmental quality through coordinated management of regional environment.     

环境规制、省际产业转移对污染迁移的空间溢出效应

目前我国正在积极地探寻经济增长高质量发展,生态环境与经济持续、稳定的和谐发展至关重要。虽然政府制定了相关的环境治理政策,但我国环境治理整体效果仍然欠佳。自从分税制改革以来,地方政府为了获得较高经济效益,会放松对环境管理,导致环境治理高投入低成效。同时,由于区域经济发展不平衡导致政府在制定相关环境治理政策时带有区域性特点,迫使高污染高能耗企业迁移至环境规制相对薄弱的地区,由此产生污染迁移的现象。基于此,对2003—2017年30个省区市(港澳台和西藏除外)环境污染总指数的空间溢出效应进行探讨,构建动态空间杜宾模型研究环境规制、省际产业转移对污染迁移的影响。研究结果表明:①环境规制总体上对环境污染具有显著直接效应且存在正向空间溢出效应,当某省环境规制强度增加,环境污染总指数会降低,从而引起污染向相邻省份转移,造成相邻省份的环境污染总指数上升。②省际产业转移整体上对环境污染具有显著直接效应且存在负向空间溢出效应,当某省的产业转移到相邻省份时,会缓解本省环境污染,却加重相邻省份的环境污染程度。这就需要中央政府加强对于各省区市的环境管控,统筹各区域的联防联治机制。产业转移承接省份在招商引资的过程中不仅要考虑本省环境承载能力和环境治理能力,还要考虑入驻企业自身污染排放处理能力,并将污染排放指数纳入筛选条件。同时,产业转移承接省份要引入企业的生产工艺、技术、研发团队等,运用技术溢出效应提升区域环境治理水平。     

Effects of climate and land-cover change on the conservation status of gibbons

Species shift their distribution in response to climate and land-cover change, which may result in a spatial mismatch between currently protected areas (PAs) and priority conservation areas (PCAs). We examined the effects of climate and land-cover change on potential range of gibbons and sought to identify PCAs that would conserve them effectively. We collected global gibbon occurrence points and modeled (ecological niche model) their current and potential 2050s ranges under climate-change and different land-cover-change scenarios. We examined change in range and PA coverage between the current and future ranges of each gibbon species. We applied spatial conservation prioritization to identify the top 30% PCAs for each species. We then determined how much of the PCAs are conserved in each country within the global range of gibbons. On average, 31% (SD 22) of each species’ current range was covered in PAs. PA coverage of the current range of 9 species was <30%. Nine species lost on average 46% (SD 29) of their potential range due to climate change. Under climate-change with an optimistic land-cover-change scenario (B1), 12 species lost 39% (SD 28) of their range. In a pessimistic land-cover-change scenario (A2), 15 species lost 36% (SD 28) of their range. Five species lost significantly more range under the A2 scenario than the B1 scenario (p = 0.01, SD 0.01), suggesting that gibbons will benefit from effective management of land cover. PA coverage of future range was <30% for 11 species. On average, 32% (SD 25) of PCAs were covered by PAs. Indonesia contained more species and PCAs and thus has the greatest responsibility for gibbon conservation. Indonesia, India, and Myanmar need to expand their PAs to fulfill their responsibility to gibbon conservation. Our results provide a baseline for global gibbon conservation, particularly for countries lacking gibbon research capacity.     

Understanding and addressing the environmental risk of microplastics

Over the past decades, the plastic production has been dramatically increased. Indeed, a category of small plastic particles mainly with the shapes of fragments, fibers, or spheres, called microplastics (particles smaller than 5 mm) and nanoplastics (particles smaller than 1 μm) have attracted particular attention. Because of its wide distribution in the environment and potential adverse effects to animal and human, microplastic pollution has been reported as a serious environment problem receiving increased attention in recent years. As one of the commonly detected emerging contaminants in the environment, recent evidence indicates that the concentration of microplastics show an increasing trend, for the reason that up to 12.7 million metric tons of plastic litter is released into aquatic environment from land-based sources each year. Furthermore, microplastic exposure levels of model organisms in laboratory studies are usually several orders of magnitude higher than those found in environment, and the microplastics exposure conditions are also different with those observed in the environment. Additionally, the detection of microplastics in feces indicates that they can be excreted out of the bodies of animal and human. Hence, great uncertainties might exist in microplastics exposure and health risk assessment based on current studies, which might be exaggerated. Policies reduce microplastic emission sources and hence minimize their environmental risks are determined. To promote the above policies, we must first overcome the technical obstacles of detecting microplastics in various samples.     

Alcohol-impaired motorcyclists versus car drivers: A comparison of crash involvement and legal consequence from adjudication data

Introduction: Driving under the influence (DUI) increases the probability of motor-vehicle collisions, especially for motorcycles with less protections. This study aimed to identify commonalities and differences between criminally DUI offenses (i.e., with a blood alcohol concentration (BAC) of 80 mg/dL or higher) committed by motorcyclists and car drivers. Methods: A total of 10,457 motorcycle DUIs and 8,402 car DUIs were compared using a series of logistic regression models, using data extracted from the documents of adjudication decisions by the courts of Jiangsu, China. Results: The results revealed that offenders from the high-BAC group (i.e., 200 mg/dL or higher) accounted for more than 20% of the total DUI offenses, and were more likely to be involved in a crash and punished with a longer detention. Motorcyclists had a higher likelihood of crash involvement, and were also more likely to be responsible for single-vehicle crashes associated with higher odds of injury sustained, compared to alcohol-impaired car drivers. In the verdict, motorcycle offenders were more likely to receive a less severe penalty. Conclusions: Interventions are clearly required to focus on reducing in the high-BAC group of offenders. For alcohol-impaired motorcyclists, their risks of crash and injury against BAC climb more steeply than the risks for car drivers. The factors including frequent occurrences, uncertainty of detection, and short-term sentences may weaken the deterrence effect of the criminalization of motorcycle DUI. Practical Applications: The traffic-related adjudication data support traffic safety analysis. Strategies such as combating motorcycle violations (e.g., unlicensed operators or driving unsafe vehicles), undertaking education and awareness campaigns, are expected for DUI prevention.     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.     

基于GIS的东辽河流域生态安全空间差异评价研究

生态安全建设是协调经济开发与生态保护的重要战略.区域生态安全评价与预警研究具有空间特性、非线性、随机性,研究过程中必须处理大量的空间信息,而空间分析和空间数据管理正是GIS的优势,它使各环境要素的分布态势及彼此间的拓扑关系一目了然,并且图文并茂地展示全流域的生态安全格局.在充分研究辽河流域生态环境状况基础上,选取东辽河流域11个县市区,借助GIS格网赋值技术,讨论了基于GIS的东辽河生态安全空间差异的评价方法.首先,拟定"压力-状态-响应"(P-S-R)指标体系,实地调查并收集资料;然后,数字化流域,运用模糊AHP法赋权并量化计算;最后,建立东辽河流域生态安全指数GRID数据库,进行GIS的空间Interpolate运算和Assembly分析.结果表明,公主岭市是生态安全区,约占全流域面积的10.78%;西丰市和东辽县是生态不安全区,约占流域面积的13.07%;其余8个地区为生态安全中等区,约占全流域面积的76.15%.评价结果与各地区现状生态环境评价基本-致.提出了相应的生态保护建议.     

新安江流域土地利用结构对水质的影响

以新安江上游流域为研究区域,用该流域2010年5月TM遥感影像图作为底图,通过实地野外调查获取了新安江流域的土地利用图.运用ArcGIS的水文、空间分析功能,将流域划分为8个子流域,并分析各子流域的土地利用结构.根据2010年1～12月的水质监测数据,分析TN、TP、高锰酸盐指数、NH4+-N、粪大肠菌群的时空变化特征,以及与土地利用结构之间的定量关系.结果表明,TN和NH4+-N有明显的时间变化特征,为枯时期>丰水期>平水期,而其他几种指标没有明显的时间变化.在空间上,整体上呈现出渔梁、浦口污染最为严重.流域内土地利用结构与水质之间的相关关系表现为:耕地、水体、建筑用地起源作用,林地、草地起汇作用.在年度上看,耕地对TN、NH4+-N、高锰酸盐指数影响最大,草地对TP影响最大;不同水期上,枯水期和丰水期,对各指标影响最大的土地利用类型为耕地,在平水期,对TN、TP、粪大肠菌群影响最大的土地利用类型分别为耕地、草地、林地.     

Effects of typical additives on the thermal stability of ammonium peroxydisulfate

Ammonium peroxydisulfate (APS), one of the most widely used inorganic peroxides in the process industries, is a thermally unstable peroxide and potent oxidizer due to the presence of peroxy bond in the molecule and is incompatible with most substances. To investigate the effect of typical additives on the thermal decomposition of APS, in this paper, diamine phosphate (DAP), monoamine phosphate (MAP), and aluminum hydroxide (AH) were selected as additives; pure APS and samples with 10 wt% and 20 wt% of additives were first tested by differential scanning calorimetry (DSC). The experiments and analysis showed that the samples with 10 wt% of additive had better thermal stability than those with 20 wt% of additive. After screening, the three groups of 10 wt% AH, 10 wt% MAP, and 20 wt% MAP additive conditions could be considered to have a better thermal stability effect on the thermal decomposition of APS. Four groups of samples were, in turn, tested by Phi-Tec II. The adiabatic results showed two discontinuous exothermic processes; 10 wt% AH promoted the weak exothermic effect in the first stage. In contrast, the three groups of additives in the main exothermic stage showed different degrees of inhibition, and the inhibiting effect was ranked as 10 wt% AH, 10 wt% MAP, and 20 wt% MAP in order. Finally, the self-accelerated decomposition temperature (SADT) was calculated under the 25 kg standard package. The adiabatic results, including SADT, were combined to render feasible recommendations for the use of additives, which provides references for the packaging and transportation of additives and their applications.